Skip to main content

Filter By:

Tools

Park Tool Bearing Cup Press
$185.95
Park's HHP-2 accurately aligns and presses 1-, 1-1/8-, 1-1/4- and 1.5-inch headset cups into your frame's headtube. It features a quick-release design for fast tool installation and removal, extra-long handles for superior leverage and stepped bushings for precise cup alignment. This versatile tool also presses cartridge bearings and cups into one-piece bottom bracket shells and holds fixed-cup wrenches in place when removing or installing adjustable-type bottom brackets.
Park Tool Bike Cleaning Brush Kit
$21.95
A clean bike is a happy bike! Park Tool's Bike Cleaning Brush Kit is a four-piece brush set designed specifically to clean bicycles. Ergonomically designed and featuring dual-density, sure-grip handles, the BCB-4.2 kit includes: • 1 GSC-1 Gear Clean Brush • 1 Tapered Detail Brush • 1 Frame Cleaning Sponge/Bristle Brush • 1 Soft Bristle Soaping Brush
Park Tool Cable Stretcher
$50.95
Commonly referred to as a 4th Hand, Park's Cable Stretcher pulls cables tight. Its one-hand operation and thumblock holds the cable so you can easily maintain cable tension while tightening cable fixing bolts and nuts. Made from chrome-plated and heat-treated steel and featuring cushion grips for comfort, the Park Cable Stretcher is a must for any serious mechanic.
Park Tool Chain Checker
$29.49
To prevent poor shifting and uneven drivetrain wear, most manufacturers recommend chain replacement at or before 1% stretch. Now you can quickly and accurately determine the wear and stretch of any chain with Park's Chain Checker. Simply insert the Chain Checker’s pins into 2 links, press the swingarm gauge tight, and then check the gauge window for an accurate reading!
Park Tool Chain-Wear Indicator
$11.95
A worn chain shifts poorly and wears sprockets at an accelerated rate. Park Tool's Chain-Wear Indicator is a “go-no go” gauge designed to accurately indicate when a chain reaches .5% and .75%, the points at which most chain manufacturers suggest replacement. The updated CC-3.2 is longer, more accurate and features permanent measurement markings.
Park Tool Crown Race Setting System (1, 1-1/8 -inch)
$84.95
Quickly, safely and easily set your crown race with Park's CRS-1 Crown Race Setting System. It includes 6 different inserts (3 for 1-inch and 3 for 1-1/8-inch steerer tubes) that ensure full contact with the crown race for precision installation.
Park Tool Crown Race Setting System — Oversized
$95.95
The CRS-15.2 uses two different insert rings to install bearing races on the 1.5-inch and 1-1/4-inch forks. The bearing surface is spared a direct hit by using aluminum inserts. Using a hammer, tap firmly on the end cap of the tube and seat the race into its proper place safely and accurately. Included extension allows work on fork steering tubes up to 425mm. - SHIS terminology: The CRS-15 services crown races in SHIS 33 and 40.
Park Tool Double-ended Spoke Wrench: Campagnolo
$11.95
Park Tool's SW-11 is a forged, double-ended spoke wrench designed to fit select Campagnolo wheels. Precision machined, plated and vinyl dipped for comfort and long life. It fits Campagnolo 5.5mm and 6.0mm hex spoke nipples.
Park Tool Essential Tool Kit
$22.95
Designed for the casual cyclist, the economical WTK-2 contains the tools needed for many basic adjustments and repairs at home or on the road.
Park Tool Fork Threading Set
$284.95
Park Tool's Fork Threading Set is designed for cutting new threads and for chasing existing threads on fork columns that are not chromed. The FTS-1's expandable cutting dies are made from the highest quality high-speed steel for precision cutting and long life. The unique thread guide system used with the FTS-1 is specially designed to allow the metal chips and shavings that result during use to fall completely through the guide, preventing damage to the fork threads and the tool. The FTS-1 includes: • Die handles • 1" x 24 tpi cutting die (Part #606) • 1" cutting guide (Part #610) Accessory dies and guides are also available separately: • 1-1/8" x 26 die (Part #607) • 1-1/8" guide (Part #611) • 1-1/4" x 26 die (Part #608) • 1-1/4" guide (Part #612) Die handles fit all three sizes of dies and guides.
Park Tool Gear Clean Brush
$4.95
Park's Gear Clean Brush has a handle on one end with a curved, serrated edge perfect for cleaning between cassette cogs. The other end's tough nylon bristles are ideal for cleaning the derailleurs, chain and other drivetrain parts to keep them clean and prevent premature wear. It also works great on brakes and other components that collect dirt and grime. The GearClean easily fits in a toolbox or pack.
Park Tool Grease Gun
$22.95
Use as a self-contained grease gun by using the included canister or screw the pump on to any tube of Park Tool grease, anti-seize or assembly compound. Small tip opening ensures precise placement of lube in any application.
Park Tool HBT-1 Hydraulic Barb Tool
$119.99
This handy tool will save time and frustration! Quickly and accurately cuts hydraulic brake line then precisely installs hose barbs into the tubing when the brake line is either on or off the bike. - Cuts hydraulic brake hose (does not cut steel braided hydraulic hose) - Installs press-in style barbed hose inserts - Replaceable parts including push pin tip and stainless steel blade - Hard anodized body for improved tool wear - Lightweight, CNC machined aluminum body Replacement parts: - 2494K Cutting Blade (set of 2) - 2497 Push Pin Tip
Park Tool HCW-5 Double-Ended Lockring Spanner
$15.95
Park's Crank and Bottom Bracket Wrench is perfect for working on old-style bottom brackets. The HCW-5 is a dual-sided lockring hook spanner, featuring a three-prong side and a single hook side for different style lockrings.
Park Tool Head Cup Remover (1 to 1-1/4-inch)
$35.95
The RT-1 Head Cup Remover makes headset cup removal easy. The tool is pulled through the frame until the flared ends snap in behind the cup. A blow on the tool head removes the cup. • Fits 1”, 1-1/8” and 1-1/4” headsets • Strong, heat treated alloy steel with nickel finish The RT-1 will also remove the PressFit 30 (PF30) bottom bracket units. The PressFit 30 inside diameter is the same as headset cups, and are pressed in the same manner. SHIS terminology: Removes cups of EC29, EC30, EC34, EC44, ZS41, and ZS44
Park Tool Head Cup Remover - Oversize
$35.95
The RT-2 Head Cup Remover makes headset cup removal easy. The tool is pulled through the frame until the flared ends snap in behind the cup. A blow on the tool head removes the cup. • Designed for the 1-1/4 inch and 1-1/2 inch headest standards • Also easily removes cups on one-piece cranks • Strong, heat-treated alloy steel with a nickel finish SHIS Terminology: The RT-2 will remove cups of ZS44, ZS49, ZS55, ZS56, EC49 and EC56 headsets.
Park Tool Heavy Duty Shop Apron
$26.95
Once you try on Park's Heavy Duty Shop Apron, there's no going back to standard aprons. The SA-3 is made from heavy 10-ounce cotton canvas and has two rows of bar tack reinforced pockets for stashing pens, parts, tools, etc. The special crossback design removes pressure from the neck for all day comfort and a nylon quick release makes the apron easy to adjust and take off. This sweet apron is a full 35-inches in length and the bottom 7-inches of the apron can be snapped up for a custom height fit. Plus, an embroidered Park Tool logo makes the apron as good looking (even when it's dirty) as it is functional.
Park Tool I-Beam Mini Fold-Up Hex Wrench/Screwdriver/Torx Set
$16.95
Park's I-Beam Mini Fold-Up Screwdriver/Torx Set includes 1.5, 2, 2.5, 3, 4, 5, and 6mm Allen wrenches, a socket 8mm Allen, a regular screwdriver and a T25 Torx tool (for disc-rotor bolts). The I-Beam conveniently fits in pockets and packs, too.
Park Tool I-Beam Mini Fold-Up Set
$15.95
The I-Beam Mini Fold-Up Set includes 3, 4, 5, and 6mm Allen wrenches, a socket 8mm Allen and regular screwdriver. It's the perfect mini-tool to get you out of binds or make quick adjustments. And, it conveniently tucks into a pocket or pack.
Park Tool Internal Cable Routing Kit
$69.95
Take the guesswork out of installing cables, wires and housing inside the frame. The IR-1.2 speeds the internal frame routing of electric wires, shift cable/housing, brake cable/housing and hydraulic tubing on carbon fiber, titanium, and aluminum frames. Kit includes four plastic-coated 250cm cables with attached magnets and unique fittings plus an external guide magnet to speed operation. Newly updated to include a dedicated E-tube Di2 cable connector that easily pulls through a 6mm frame hole. Opposite polarity magnets on cables seek and attach inside frame tubes, making it easy to route through frame entrances and exits. Works with any size frame including tandems. A true time and frustration saver!
Park Tool Mini Chain Brute Chain Tool
$16.95
Park's Mini Chain Brute Chain Tool goes anywhere and features a V-shaped handle, a super-strong replaceable pin, and fine threads to make chain removal and installation a breeze. The CT-5 works on any derailleur chain, including Shimano Hyperglide and 9-, 10-, and 11-speed. It works for loosening tight links, too.
Park Tool Nipple Driver
$21.95
A great time-saver! Park Tool's Nipple Driver is neatly designed to self-center and drive conventional nipples quickly and easily during wheel building. The ND-1 is built with a comfortable, dual-density grip and lined with precision bronze bearings to ensure a long, smooth running life. It works with rims up to 50mm deep.
Park Tool Professional Wheel Truing Stand
$412.95
The next generation of wheel truing stands! The TS-4 is made to accurately gauge any size wheel, with or without the tire installed. The TS-4 has many of the same features as Park Tool's famous TS-2.2 with some additional attributes to accommodate today’s wide variety of hub, wheel and tire combinations. - Both uprights move simultaneously to always keep wheel centered in the stand. - Accommodates axle widths from 75mm to 215mm - Direct action caliper arm adjusts to work with wheel sizes from 16" to 29"+ - Accommodates tire widths up to 5" with or without brake rotor mounted - Machined, welded, assembled and calibrated in our factory in St. Paul, MN - Precise accuracy, operation and adjustability - Built in thru-axle adaptors - Chrome plated and powder coated heavy gauge steel construction - Removable, replaceable nylon caliper tips to protect painted/anodized rims - Dial Indicator compatible (TS-2Di) (Sold separately) - Rotor gauge compatible (DT-3 & DT-3i.2) (Sold separately)
Park Tool Replacement Brush Cartridge for CM-25
$20.38
Includes two rotating brushes, two sponges and two wicking pads already installed in a composite cartridge, ready to snap into the CM-25 Professional Chain Scrubber (sold separately.
Park Tool Rotor Truing Fork
$18.95
If you have a bike with disc brakes, you'll want Park's Rotor Truing Fork. It allows you to gently adjust bent and damaged disc-brake rotors. It's made from high-quality steel and features 2 laser-cut slots for precise adjustments and a vinyl handle for comfort and control.
Park Tool Shop Apron
$19.95
Park’s Shop Apron protects your clothes and provides large pockets to hold frequently needed tools. It’s made of heavy-duty, 7-ounce poly/cotton twill for comfort and durability.
Park Tool Spoke Wrench
$7.49 - $9.49
Park's professional-quality, precision-sized spoke wrenches are hardened and chrome plated for long service. Wrenches are vinyl coated in one of four colors indicating the size at a glance. You will find these wrenches in virtually every professional bike shop and every shop mechanic's personal tool stash. Make sure you have the sizes you need in your home toolbox and bike bag.
Park Tool Spoke Wrench For Mavic Wheel Systems
$12.49
Because even your reliable Mavic wheels will eventually need truing, Park offers their Spoke Wrench For Mavic Wheel Systems. This comfortable, vinyl-coated, double-ended spoke wrench easily accesses and turns Mavic nipples. One end fits Mavic 6-spline, 9mm threaded eyelets and the other fits their 7-spline, 6.4mm nipples.
Park Tool Spoke Wrench For Shimano Wheel Systems
$11.95
Park's Spoke Wrench For Shimano Wheel Systems is the right tool for the job. It's made of durable tool steel and features 4.4mm and 3.75mm openings to fit all Shimano Wheel System nipples located at the hub and at the rim. It's vinyl-coated for a great grip, too.
Park Tool Stainless Steel Pint Glass
$7.95
All metal cup made of 304 Stainless Steel.
Page 1 of 2 Next page